SolderPlan connector
A connector (remote MCP server) that checks a guitar wiring plan before you solder. It works in AI apps that support remote MCP connectors. Describe your pickups, switches, and what each position should do; your AI app drafts the connections, and SolderPlan simulates every switch position to confirm each one gives the pickup combination you asked for, with no dead, shorted, or out-of-phase positions.
What it does
| Tool | What it returns |
|---|---|
| validate_wiring | For every combination of switch positions (volume and tone at full): which coils reach the output jack, whether they're in series or parallel, whether they're in phase, and whether the output is dead or shorted. Each position is compared with what you asked for. You get a pass/fail verdict, a position table, warnings (unconnected leads, ungrounded shields, parts to double-check), and a connection list with each pickup lead's role from the maker's published color code. |
| list_wiring_parts | The switch types, pots, and pickup color codes the checker knows, with terminal names, switch states, and the source for each color code. |
It also provides a prompt, plan_wiring, with the steps for turning a plain-English build into a checkable plan.
Supported parts
- Switches: 3-way blade, 4-way Tele, 5-way blade, 5-way super switch (4-pole), 3-way toggle, DPDT push-pull, DPDT mini-toggle (on-on and on-off-on).
- Humbucker color codes: Seymour Duncan, DiMarzio, Bare Knuckle, Lindy Fralin (from each maker's published wiring sheet); Gibson and Fender (from independent color-code charts, flagged so you can confirm against your pickup's sheet). Any other maker works if you give the lead colors from your pickup's sheet.
- Single coils: hot and ground leads, with magnet polarity if you know it (for hum-cancelling checks).
- Passive circuits only: no active electronics, piezo, or MIDI.
Connect
Server URL: https://mcp.solderplan.com/mcp (Streamable HTTP, OAuth sign-in with Google).
Claude: from the directory
- In Claude, open the connectors directory and search for SolderPlan.
- Select Connect. You'll be asked to approve the connection and sign in with a Google account.
Claude: as a custom connector
- In Claude, go to Settings > Connectors and choose Add custom connector.
- Name it SolderPlan and enter the URL
https://mcp.solderplan.com/mcp. Leave the advanced settings blank. - Select Connect, approve the connection, and sign in with Google.
Requirements: a Claude plan that includes connectors, and a Google account for sign-in.
Other AI apps
Any app or coding tool that can add a remote MCP server with OAuth sign-in can use the URL above; look for "add MCP server" or "custom connector" in its settings. Setup steps above are tested in Claude. If another app won't connect, email us with its name and the error.
How to use it
- Describe the build. Pickup makers and models by position, switch type, pots and push-pulls, and what you want each switch position to do. Plain English is fine.
- Let your AI app draft and check it. It builds the connection plan and runs validate_wiring. If a position doesn't match, it fixes the plan and checks again.
- Read the position table and connection list. Each numbered line in the connection list is one solder joint or wire run.
- Confirm flagged parts. If a warning says a color code or switch chart should be confirmed, check it against the sheet that came with the part or with a multimeter before soldering.
Example prompts
"I'm wiring an HSH guitar: Seymour Duncan JB in the bridge, a single-coil middle, DiMarzio Air Norton in the neck, with a 4-pole 5-way super switch. I want: 1 bridge humbucker, 2 bridge north coil plus middle, 3 middle, 4 middle plus neck humbucker, 5 neck humbucker. Plan the wiring and check every position."
The AI app drafts the plan and calls validate_wiring. You get Result: PASS, a five-row position table (positions 1 and 5 marked hum-cancelling), and a connection list such as "bridge.black (slug coil, hot end in standard series) — sel.A.1 — sel.A.2".
"Add a push-pull on the tone knob of my one-humbucker guitar (DiMarzio Super Distortion). Pushed in is the full humbucker; pulled up should be just the north coil."
The result shows the knob-down row as the full humbucker in series and the knob-up row as the slug (north) coil only, and tells you which leads go to the push-pull's middle lug.
"Here's how I wired my Les Paul (Gibson pickups, 3-way toggle, two volumes, two tones). The middle position sounds thin and quiet. Can you check it?"
If the neck pickup's hot and ground are reversed, the middle row fails with "Coils are out of phase", naming the two leads to swap.
"Which lead colors does a Bare Knuckle 4-conductor use, and which coil is the slug coil?"
The AI app calls list_wiring_parts for that maker and answers from the published color code, with the source.
Limits
- Checking is free, with a fair-use cap of 200 checks per account per day (UTC).
- Up to 8 pickups, 24 parts, and 128 switch-position combinations per check.
- Positions are checked with volume and tone at full. Tone and treble-bleed parts are listed in the connections but don't change which coils are on.
- The checker confirms which coils are connected and how. It can't detect a cold solder joint, a damaged pickup, or a part whose internal contacts differ from its standard chart.
- Printable drawn diagrams are available on solderplan.com.
Privacy
The tools receive only the wiring plan your AI app sends in a tool call: part types, terminal connections, pickup makers and models, and the positions you want. That plan is processed to produce the result and is not stored. SolderPlan keeps your account (Google account ID and email) and a daily count of checks for 7 days. Full details: Privacy & terms.
Troubleshooting
The app says it couldn't connect
Remove the connector in your app's settings and add it again. If Google sign-in fails, check that your Google account's email address is verified.
"No color code on file for maker"
Give your AI app the lead colors from the wiring sheet that came with your pickup (which color is hot, which two form the series link, which goes to ground). It passes them as a custom color code.
A switch or color code is flagged to confirm
The 4-way Tele switch chart, and the Gibson and Fender color codes, haven't been confirmed against a maker datasheet; DiMarzio and Fender magnet polarity also comes from independent charts, and Gibson polarity isn't set because sources disagree (refer to the slug or screw coil instead of north or south). The check is still run; confirm those parts with a meter, a compass, or the included sheet before soldering.
"Daily limit reached"
The cap resets at 00:00 UTC.
Disconnect and delete your data
Remove the connector in your AI app to stop access. To delete your SolderPlan account, email [email protected] from the address you signed in with.
Support
Email [email protected]. We answer within two business days. Report security issues to the same address with "Security" in the subject.