A wiring diagram for the guitar you're actually building.
Tell us your pickups, switch, and controls, and what each switch position should do. You get a printable diagram for that exact setup, with every position checked before it ships.
ORDER · $25Delivered by email within 3 business days (Mon–Fri, excluding US holidays)
How it works
1 · DESCRIBE
Pickups by position, switch, pots, and the sound you want from each position. Plain English is fine.
2 · CHECK
Every switch and push-pull state is traced against what you asked for: no dead, shorted, or out-of-phase positions.
3 · SOLDER
A printable PDF: the diagram drawn in your pickups' lead colors, every wire numbered to a solder checklist, a position table, and a parts list.
What you get
Every diagram comes with a position table like this one (HSH guitar, 5-way super switch):
| Position | Pickups on | Coils | Phase | Check |
|---|---|---|---|---|
| 1 | Bridge humbucker | Series | In | OK |
| 2 | Bridge slug coil + middle | Parallel | In | OK |
| 3 | Middle | Single | In | OK |
| 4 | Middle + neck humbucker | Parallel | In | OK |
| 5 | Neck humbucker | Series | In | OK |
Order
Fill this out, then pay on the next screen. If your setup can't be built with the parts listed, we email you before drawing anything and refund in full.
Questions
Which pickup brands do you cover?
Any passive pickup with a published wire color code. Common brands (Seymour Duncan, DiMarzio, Fender, Gibson, Bare Knuckle, Fralin, EMG's passive models) are straightforward. If a maker doesn't publish their code, we'll ask you to check it with a meter and tell you how.
How is the diagram made?
We turn your description into a full connection list, then trace every switch position and push-pull state against what you asked for, checking for dead positions, shorts, and phase problems. Anything that doesn't check out cleanly gets a hands-on look before it ships.
What if it doesn't work?
If the guitar doesn't do what the position table says after you've wired it per the diagram, email us within 30 days. We'll troubleshoot with you and correct the diagram, or refund you.
Do you sell parts or wired harnesses?
No. You get the diagram and a parts list; buy from whoever you like.
Active pickups, piezo, MIDI?
No. Active pickups need the battery and preamp wiring their maker specifies, and each maker publishes it: Fishman Fluence, EMG, Seymour Duncan Blackouts. Piezo and MIDI systems aren't covered either. We draw passive pickups, switches, pots, caps, and mini-toggles.
Do you make guitars or work with a guitar maker?
No. Body shapes on this site describe common guitar styles; SolderPlan isn't affiliated with any guitar, pickup, or switch maker.